Service Hotline

+49 (0)4102 468 – 950

Hotline hours
Mon, Thu 13:00 - 17:00
Tue, Wed 10:00 - 12:00
Fri 13:00 - 15:00


• High quality aluminium enclosure
• External data interface: 1x USB 3.0
• Transfer rate: USB 3.0 up to 5 Gbit/s
• New Chipset support real
   SATA III 6Gbit/s and UASP
• RAID 0 (Stripping), RAID 1 (Spiegelung), JBOD

GR2660-B3 - External RAID system for 2x 2.5" SATA I/II/III HDDs

Aluminium/plastic enclosure for 2.5" (6.35 cm) SATA HDDs/SSDs up to 9.5 mm high.

USB 3.0 up to 5 Gbit/s - Backwards compatible to USB 2.0/1.1

RAID Level: RAID 0, 1, JBOD

LED indicator for HDD access & alarm, rebuilding, RAID modes and host connection

Quiet - Fanless

HotSwap and Plug & Play

Faster than it looks
Using the UASP-enabled chipset can manage three to four times higher data transfer rates than USB 3.0 would otherwise permit. Thus, everything that is planned happen more efficient, faster and more enjoyable. Possible RAID levels are 0.1 and JBOD.

Two is Better
Accommodating two 2.5" HDDs or SSDs in this RAID enclosure is done in no time. Thanks to the toolless mounting, the ability to replace an HDD while the system operates is extremely simple.

Simply double considered
The high quality aluminium enclosure ensures an effecient cooling for your sensible media. Therefore the use of a loud fan is unnecessary. In addition, this enclosure is a hit in taking care of the environment as well: it is especially energy saving due to the running synchronisation with the PC.


In our support area you can find our download center, where we provide you with up to date firmware updates, drivers and software for many RaidSonic products. We answer your most frequently asked questions and if the need arises, you could contact our support team directly.

To read and print the file, you require the program Acrobat Reader, which you can download for free from the Adobe website





FAQ's für SOHO/RAID-Solutions
No answer found? Please contact our support team.

IB-RD4320StUS2 - Device switches off after a few seconds

Question: Why turn on the IB-RD4320StUS2 few seconds after switching off by itself?

Answer: Please verify that the IB-RD4320StUS2 is properly connected to your PC. This is a normal behavior of the device when it is not connected by a data cable to the PC. Please connect the USB 2.0 or eSATA cables.

Interesting facts about the new USB 3.1 standard
The USB interface has been the standard for PC hardware and the new USB 3.1 standard entails several improvements. Not only the data transfer rates are much faster but also the charging of smart devices. And finally, the reversible-plug connector is introduced to USB as well.

Compared to USB 3.0 the transfer rates are doubled, thus the USB 3.1 interface achieves speeds of up to 10 Gbit/s which makes the interface fast enough to even max out current SSDs.

Another novelty, the reversible-plug USB Type-C connector, can be plugged into an appropriate USB Type-C connector. Without worrying about its directions, it will fit either way. USB Type-C is able to connect monitors via its USB interface. At the same time, data can flow further using the very same USB port. Theoretically, the transfer rates should suffice to connect 5K monitors which are not yet widely-used.

On top of that the new Type-C connector allows the use of Power Delivery (PD). A feature which provides the possibility to charge devices using up to 100 Watt. Supposably, even notebooks could be charged via USB. In the near future it might even be possible for the new Type-C interface to become the new standard for smartphones, tablets and other smart devices because of the connector's small size.

The already well-established USB 3.0 interfaces Type-A and Micro-B will still be preserved for the future, though, and will also have transfer rates of up to 10 Gbit/s. Whether Type-C is completely going to replace the old-established USB interfaces is yet to be awaited. In the meanwhile, the compatibility between the old USB types and the new Type-C is ensured by already available USB adapters or a PCI-E expansion card. This way the new USB type remains compatible with older PCs or notebooks, even without having Type-C ports.

RaidSonic Support and Service

When you have purchased a product from us our relationship doesn’t end, rather a new kind of relationship will start. It doesn’t matter if you have questions or you want to update an older product or you have a problem (with the product) that we shall solve, you are welcome. By the way, RMA means returnmerchandise authorization. Wenn Sie unter FAQs keine ausreichende Antwort auf Ihre Fragen gefunden haben, ist es vielleicht angebracht, mit unserem Support-Team in Kontakt zu treten.
Entweder per eMail oder per Telefon. In letzteren Fall seien Sie bitte vorbereitet, die Auskünfte, die im eMail-Formular angesprochen werden, am Telefon zu geben.

Support Hotline +49 (0) 4102 468 950

Support Contact

Hotline hours of our RaidSonic service and support team:
Mon, Thu 13:00 - 17:00 | Tue, Wed 10:00 - 12:00 | Fri 13:00 - 15:00


Below you can find general information regarding the product.



Article No:


EAN Code:





External case





HDD size (cm):

HDD size (inch):


HDD interface:

2x 2.5" SATA I/II/III

Hot & Swap:


Plug & Play:


HDD height:

HDD capacity:

No limit


Windows, Mac and Linux

External data interface:

USB 3.0

RAID Level:

RAID 0 (Stripping), RAID 1 (mirroring), JBOD

Power switch:


Auto rebuilding:



USB 3.0 up to 5 Gbit/s

Power connector:

Wall power supply: 12 V, 2 A

Box content:

1x GR2660-B3, 1x USB 3.0 cable, 1x wall power supply 1x accessory kit, 1x quick installation guide

Packing unit:

10 pcs./carton

Total weight:

9.5 kg/carton

Gross weight (incl. packing):

0.85 kg

Net weight:

0.49 kg


510x390x265 mm

Dimension of packing box:

184x95x238 mm

Dimension of article:

150x33,5x174 mm

Country of origin:


Import tax: